Do you need some help?

Call us now on: 01706 242050

Mersen Surge Protector Type 1+2 SPD 1 Pole 277 Volt 20KA L-N Remote Indication

SKU
83120105

Contact us for pricing and availability.
Call us now on 01706 242050

Free delivery on orders over £200
Mersen
(Size: 4 MB)

Available at LED Controls the Mersen Type 1 surge protector STPT12-12K320V-1PM has 1 pole and operates at 277 volts. The maximum continuous operating voltage is at 320 volts with a nominal discharge current of 20ka. The peak current can be withstood 20 times before the unit reaches end of life. These cartridges are replaceable.

This surge arrestor is din rail mountable and the live, neutral and earth contacts are clearly marked. A small phillips screwdriver is used to tighten or loosen the contacts.

Surge protection devices divert excess current to earth which prevents damage to electrical wiring and electrical shock in an over voltage event. These are also known as SPD’s. This surge protector has remote indication.

More Information
Product Image For Illustration Purposes Only
Manufacturer Mersen
Number of Poles 1 pole
Voltage 277V
Maximum Continuous Voltage 320V
Nominal Discharge Current 20Ka
Remote Indication Yes
System Type L-N
Alternative Product SKU STPT12-12K320V-1PM
Product Lead Time Standard Delivery 7-10 Days
Write Your Own Review
You're reviewing:Mersen Surge Protector Type 1+2 SPD 1 Pole 277 Volt 20KA L-N Remote Indication

Protection system of coordinated stages: Type 1, 2 and 3 SPDs

The SPDs of a surge protection system must be able to withstand the discharged current and provide a Ures level (residua l voltage) lower than the Ue peak voltage that the equipment can withstand. Most of the times it is not possible to achieve this with just one SPD, especially because the intensity of the surge is not known, and because of the induction of overvoltages when conductors exceed 10m.

The optimal system of protection is the 3-STEP approach, in which successive stages are combined in the performance of high discharge capacity devices and devices with an optimal voltage protection level (low). This is addressed by the definition of "Types" or "Classes" of SPDs according to the type of transient pulses to which each protected zone in the installation is subject to.

Brand Logo

Latest News

A quick guide to IP ratings

A quick guide to IP ratings

November 20, 2024 Read full
4 top benefits of programmable logic controllers

4 top benefits of programmable logic controllers

November 12, 2024 Read full
4 key reasons why scalability is so important

4 key reasons why scalability is so important

October 22, 2024 Read full
Our top tips for maintaining your Variable Speed Drives

Our top tips for maintaining your Variable Speed Drives

October 15, 2024 Read full